What’s new in 6.47beta49 (2020-Mar-20 07:08):

Important note!!!

– The Dude server must be updated to monitor v6.46.4 and v6.47beta30+ RouterOS type devices.
– The Dude client must be manually upgraded after upgrading The Dude server.
– Make sure LTE APN Profile name does not match any of the DHCP server’s names if LTE passthrough is used.
– The Dude requires “winbox” policy instead of “dude” to monitor v6.46.4 and v6.47beta30+ RouterOS type devices.

!) dns – added client side support for DNS over HTTPS (DoH) (RFC8484);
!) socks – added support for SOCKS5 (RFC 1928);
!) socks – added support for SOCKS5 (RFC 1928);
!) user – enable “winbox” policy for groups with “dude” policy;

Changes in this release:

!) dns – added client side support for DNS over HTTPS (DoH) (RFC8484);
!) socks – added support for SOCKS5 (RFC 1928);
!) user – enable “winbox” policy for groups with “dude” policy;
*) branding – fixed identity setting from branding package;
*) branding – properly use HTML files for Hotspot (introduced in v6.47beta);
*) bridge – added warning message when port is dynamically added to entry with VLAN range (CLI only);
*) bridge – correctly remove disabled MSTI;
*) bridge – improved hardware offloading enabling/disabling;
*) capsman – fixed “certificate” parameter updating on CAP;
*) certificate – disabled CRL usage by default;
*) certificate – do not use SSL for first CRL update;
*) chr – added support for file system quiescing;
*) crs3xx – do not change bridge host ID’s when updating host table (introduced in v6.47beta32);
*) crs3xx – fixed interface statistics for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
*) crs3xx – fixed traffic forwarding after disabling/enabling bridge hardware offloading for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
*) dhcpv4 – added end option (255) validation for both server and client;
*) dhcpv4-client – improved stability when changing client while still receiving advertisements;
*) dhcpv6-server – fixed MAC address retrieving from DUID when timestamp is present;
*) dude – fixed connection to other RouterOS type devices through The Dude agents (introduced in v6.46.4);
*) filesystem – fixed NAND memory going into read-only mode or becoming unstable over time;
*) hotspot – updated splash page design (‘/ip hotspot reset-html’ required);
*) ike1 – added error message when specifying “my-id” for XAuth Identity;
*) ike1 – improved stability when performing policy lookup on non-existant peer;
*) ipsec – control CRL validation with global “use-crl” setting;
*) ipsec – do full certificate validation for identities with explicit certificate;
*) lcd – fixed LCD service becoming unavailable on devices without LCD screen;
*) led – added “dark-mode” functionality for CRS105-5S-FB;
*) led – fixed minor typo in LED warning message;
*) lora – added IPv6 support for LoRa packet forwarder;
*) lora – added value limits for “freq-off” parameter;
*) lora – properly update source address for packets when routing table is changed;
*) lte – added support for NEOWAY N720;
*) lte – fixed “allow-roaming” setting when using LTE network mode on R11e-LTE;
*) lte – made “mac-address” parameter read-only;
*) ppp – added support for ZTE MF90;
*) ppp – fixed minor typo when running “info” command;
*) proxy – increased minimal free RAM that can not be used for proxy services;
*) quickset – do not show “SINR” field in Quick Set when there is no data;
*) quickset – removed “EARFCN” field from Quick Set;
*) route – improved system stability after reboot with large amount of VLAN interfaces with PPPoE servers attached;
*) sniffer – fixed minor typo in “host” menu;
*) snmp – changed “upsEstimatedMinutesRemaining” reported value from seconds to minutes;
*) ssh – fixed SHA256 user authentication algorithm checking (introduced in v6.46.4);
*) supout – added “gps” section to supout files;
*) switch – made “auto” the default value for “vlan-id” parameter when creating a new static host entry;
*) system – improved driver loading speed on startup;
*) system – improved system stability when forwarding traffic from switch chip to CPU (introduced in v6.43);
*) traffic-generator – improved statistics reporting;
*) w60g – fixed link status logging;
*) w60g – improved rate selection in low traffic conditions;
*) winbox – added “Options” parameter support for DHCPv6 client and server;
*) winbox – added “Rate” parameter for switch ACL rules;
*) winbox – added 160Mhz extension channel support for CAPsMAN;
*) winbox – added comment support for “Switch->VLAN” menu;
*) winbox – added support for “Tools->WoL” menu;
*) winbox – aligned all “IP->Traffic Flow->IPFIX” check boxes in single line (WinBox v3.22 required);
*) winbox – allow setting “20/40/80/160Mhz-eeeeeeCe” channel under “Channel Width” parameter;
*) winbox – allow setting “Primary” parameter for “balance-tlb” bonding interfaces;
*) winbox – do not show “Revision” parameter under “System/RouterBOARD” menu on devices that have only one revision;
*) winbox – fixed “ARP” parameter inheritance from “CAPs Configuration” configuration;
*) winbox – fixed “BGP Origin” value display under “IPv6->Routes” menu;
*) winbox – fixed “Bands” parameter display for LTE interfaces;
*) winbox – fixed “DSCP” parameter value setting;
*) winbox – fixed “Data Rate” checkbox alignment (WinBox v3.22 required);
*) winbox – fixed “Frequency” and “Secondary Frequency” parameter inheritance from “CAPs Channel” configuration;
*) winbox – fixed “Passthr. MAC Address” parameter display “LTE APNs” menu;
*) winbox – fixed “Switch” menu on CRS354-48P-4S+2Q+;
*) winbox – fixed “dst-port” unsetting in “IP->Hotspot->Walled Garden” menu;
*) winbox – fixed automatic “IPv6->Firewall->Address List” table update;
*) winbox – fixed bonding type interface support for “Switch->Host” table;
*) winbox – made “none” the default value for “Security Profile” parameter when creating a new “Wirelees->Connect list” entry;
*) winbox – made “yes” the default value for “Inject Summary LSAs” parameter when creating a new NSSA or STUB area;
*) winbox – properly show “Hw. Offload Group” value for each interface under “Bridge->Ports” menu;
*) winbox – renamed “Memory used” to “HDD used” for HDD type under “Tools->Graphing->Resource Graphs”;
*) winbox – renamed “Routerboard” to “RouterBOARD” under “System/RouterBOARD” menu;
*) winbox – show “Hardware Offload” parameter for bonding interfaces;
*) winbox – show “System/RouterBOARD/Mode Button” on devices that have such feature;
*) winbox – updated icon design;
*) wireless – added “U-NII-2” support for hAP ac2 and RBwAPGR series devices;
*) wireless – enabled unicast flood for DHCP traffic on ARM architecture access points;
*) wireless – fixed default “antenna-gain” setting on SXT 2 and LtAP series devices;
*) wireless – updated “indonesia4” regulatory domain information;

Other changes since v6.46.4:

!) socks – added support for SOCKS5 (RFC 1928);
*) bonding – improved slave interface MAC address handling;
*) bonding – prefer primary slave MAC address for bonding interface;
*) bridge – added logging message when a host MAC address is learned on a different bridge port;
*) crs3xx – correctly remove switch rules on CRS317-1G-16S+ and CRS309-1G-8S+ devices;
*) crs3xx – fixed “ingress-rate” property on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
*) crs3xx – fixed QSFP+ interface linking for CRS326-24S+2Q+ device (introduced in v6.47beta19);
*) crs3xx – improved SFP+ DAC cable initialization for CRS326-24S+2Q+ device;
*) crs3xx – improved switch host table updating;
*) defconf – fixed “no-defaults=yes” applying default configuration (introduced in v6.47beta);
*) defconf – fixed default configuration initialization if power loss occurred during the process;
*) dhcpv6-client – improved error logging when when renewed address differs;
*) discovery – do not send CDP and LLDP packets on interfaces that does not have MAC address;
*) discovery – do not send discovery packets on inactive bonding slave interfaces;
*) discovery – do not send discovery packets on interfaces that are blocked by STP;
*) disk – improved recently created file survival after reboots;
*) dns – added support for exclusive dynamic DNS server usage from IPsec;
*) dot1x – added “radius-mac-format” parameter (CLI only);
*) dot1x – added hex value support for RADIUS switch rules;
*) dot1x – added range “dst-port” support for RADIUS switch rules;
*) dot1x – added support for lower case “mac-auth” RADIUS formats;
*) dot1x – fixed “reject-vlan-id” value range;
*) dot1x – fixed dynamically created switch rule removal when client disconnects;
*) dot1x – fixed port blocking when interface changes state from disabled to enabled;
*) dot1x – improved debug logging output to “dot1x” topic;
*) dot1x – improved value validation for dynamically created switch rules;
*) fetch – fixed “User-Agent” usage if provided by “http-header-field”;
*) health – added “gauges” submenu with SNMP OID reporting;
*) ike1 – added support for “UNITY_DEF_DOMAIN” and “UNITY_SPLITDNS_NAME” payload attributes;
*) ike2 – added support for “INTERNAL_DNS_DOMAIN” payload attribute;
*) ipsec – added “split-dns” parameter support for mode configuration (CLI only);
*) ipsec – added “use-responder-dns” parameter support (CLI only);
*) ipsec – fixed minor spelling mistake in logs;
*) ipsec – improved IPsec service stability when receiving bogus packets;
*) lte – added support for multiple passthrough APN configuration;
*) lte – do not allow running “scan” on R11e-4G;
*) lte – fixed “band” value setting when configuration is reset on R11e-4G;
*) lte – fixed multiple APN reactivation after deactivation by operator;
*) lte – show “phy-cellid” value only in LTE mode;
*) netinstall – removed “Flashfig” from Netinstall;
*) netinstall – removed “Make Floppy” from Netinstall;
*) netinstall – signed netinstall.exe with Digital Signature;
*) quickset – removed “LTE band” setting from Quick Set;
*) quickset – show “Antenna Gain” setting on devices without built-in antennas;
*) quickset – use “station-wds” mode when connecting to AP with RouterOS flag;
*) routing – improved IGMP-Proxy service stability when receiving bogus packets;
*) sniffer – allow setting port for “streaming-server”;
*) snmp – added “dot1qTpFdbTable” OID reporting for Q-BRIDGE-MIB;
*) snmp – fixed “dot1dBasePort” index offset for BRIDGE-MIB;
*) snmp – improved OID policy checking and error reporting on “set” command;
*) snmp – improved stability when polling MAC address related OID;
*) supout – added “dot1x” section to supout files;
*) supout – improved PoE-out information reporting;
*) supout – improved UPS information reporting;
*) system – correctly handle Generic Receive Offloading (GRO) for MPLS traffic;
*) tr069-client – removed warning log message when not using HTTPS;
*) traceroute – improved stability when invalid packet is received;
*) traffic-flow – added “postDestinationMacAddress” parameter support for IPFIX and Netflow v9;
*) traffic-flow – added “postDestinationMacAddress” parameter support for IPFIX and Netflow v9;
*) upgrade – fixed space handling in package file names;
*) ups – improved compatibility with APC Smart UPS 1000 and 1500;
*) w60g – improved stability after multiple disconnections;
*) w60g – use “arp” and “mtu” parameters from master interface when creating a new station;
*) webfig – updated icon design;
*) winbox – added “auto-erase” option to “Tool/SMS” menu;
*) winbox – added support for inline bar graphs for LTE signal values;
*) winbox – removed duplicate “join-eui”, “dev-eui”, “counter”, “chain”, “size” and “payload” parameters under “Lora/Traffic”;
*) winbox – updated icon design;
*) wireless – allow using “russia4” regulatory domain on RU locked devices;
*) www – added “tls-version” parameter in “IP->Services” menu (CLI only);

3CX is a PBX software available in Cloud Server 3CX. Contact us to find out our latest offers!

Comments are closed.